|
|
Universal communication unit
Ružička, Michal ; Mlýnek, Petr (referee) ; Sláčik, Ján (advisor)
This bachelor thesis is going to deal with communication over the power network. Aim of this project is to clarify this issue and consequently to use the acquired knowledge for desingning own communication unit. The basic parameters of power network which influence this type of communication are being described in this thesis. The concept of universal communication unit is created. Pheripheral solutions are chosen for this concept and the given device will be made of them. The custom communication unit is created on this basis. The funkcionality of this unit is tested in the work.
|
|
|
Active database of standart at Institute of design created
Slezák, Jan ; Zimmerman, Martin (referee) ; Dvořáček, Jiří (advisor)
Aim of this bachelor’s thesis is to create compact database of valid standards, which are on hand the Institute of design created with the possibility continuous refilling by database system. A short charakteristics of standard and basic identification data belong to the survey. There is charakteristic of standard, kinds of standards and history of standards in the first part. Creation of standards, their numbering and obligation are introduced in the second part. Databases are introduce in the third part.
|
|
|
Modem for powerline communication
Sláčik, Ján ; Mlýnek, Petr (referee) ; Kolka, Zdeněk (advisor)
This bachelor thesis is dealing with the standards and usable circuits applications for a powerline communication, which are currently available. Principle of this kind of communication is described for default supply network 230 V/50 Hz. This work is also describing several available modems which can be used for this type of communication. The properties of the standards PRIME and the G3-PLC, which are presently at disposal, are specified, measured and compared with each other in this project. The concentrator based on the G3-PLC standard extended about radio interface was designed. Afterwards this device was tested in various topologies and interference scenarios. The graphical interfaces, which allow the transfer measurements in multiple modes are described is this work as well. The entire measurements were realized in a real conditions for both tested modems. The results of these measurements are validating the purpose of each standard and its configuration.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
|
Universal communication unit
Ružička, Michal ; Mlýnek, Petr (referee) ; Sláčik, Ján (advisor)
This bachelor thesis is going to deal with communication over the power network. Aim of this project is to clarify this issue and consequently to use the acquired knowledge for desingning own communication unit. The basic parameters of power network which influence this type of communication are being described in this thesis. The concept of universal communication unit is created. Pheripheral solutions are chosen for this concept and the given device will be made of them. The custom communication unit is created on this basis. The funkcionality of this unit is tested in the work.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
|
Modem for powerline communication
Sláčik, Ján ; Mlýnek, Petr (referee) ; Kolka, Zdeněk (advisor)
This bachelor thesis is dealing with the standards and usable circuits applications for a powerline communication, which are currently available. Principle of this kind of communication is described for default supply network 230 V/50 Hz. This work is also describing several available modems which can be used for this type of communication. The properties of the standards PRIME and the G3-PLC, which are presently at disposal, are specified, measured and compared with each other in this project. The concentrator based on the G3-PLC standard extended about radio interface was designed. Afterwards this device was tested in various topologies and interference scenarios. The graphical interfaces, which allow the transfer measurements in multiple modes are described is this work as well. The entire measurements were realized in a real conditions for both tested modems. The results of these measurements are validating the purpose of each standard and its configuration.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
|
Active database of standart at Institute of design created
Slezák, Jan ; Zimmerman, Martin (referee) ; Dvořáček, Jiří (advisor)
Aim of this bachelor’s thesis is to create compact database of valid standards, which are on hand the Institute of design created with the possibility continuous refilling by database system. A short charakteristics of standard and basic identification data belong to the survey. There is charakteristic of standard, kinds of standards and history of standards in the first part. Creation of standards, their numbering and obligation are introduced in the second part. Databases are introduce in the third part.
|
guest ::
